OE 10W-30 Synthetic Motor Oil
(OET)
Formulated for Excellent Engine Protection and
Performance
Package sizes include:
1-Quart Bottle
1-Quart Bottles (case of 12)
30-Gallon Drum
55-Gallon Drum
AMSOIL OE Synthetic Motor Oils help provide
better wear control, high- and low-temperature protection and
increased fuel economy compared to conventional oils. The oil
drain interval recommendations for many of today’s vehicles
extend well beyond the traditional 3,000-mile interval, some up
to 12,000 miles with electronic oil monitoring systems. AMSOIL
OE Oils provide excellent protection and performance for the
entire length of the original equipment manufacturer’s
recommended drain interval.
AMSOIL, the leader in automotive synthetic lubrication,
produced the world’s first API-qualified synthetic motor oil in
1972. Trust the extensive experience of AMSOIL, The First in
Synthetics®, to do the best job protecting your engine.
Improve Fuel Economy
Formulated with friction modifiers, AMSOIL OE Synthetic Motor
Oils are fuel-efficient oils that reduce friction-related
energy loss. They provide better fuel economy compared to
conventional, non-fuel-efficient motor oils.
Maintain Low Emissions
AMSOIL OE Synthetic Motor Oils are friendly toward modern
emissions control systems, promoting proper operation of
catalytic converters for optimum service life and low exhaust
emissions.
Protect in All Temperatures
AMSOIL OE Synthetic Motor Oils are multi-viscosity
formulations. They resist the effects of thermal breakdown,
including evaporation and viscosity loss, while remaining fluid
in cold temperatures for easier cold starts and fast start-up
circulation.
Keep Engines Clean
Fortified with high levels of detergent and dispersant
additives, AMSOIL OE Synthetic Motor Oils are engineered to
resist sludge and carbon deposits better than conventional
oils. They promote clean operation for longer-lasting,
better-running engines.
Bid Appropriate
AMSOIL OE Synthetic Motor Oils fulfill the requirements of most
public and private purchasing bids. They are cost-effective,
making them ideal where synthetic motor oil is specified.
APPLICATIONS
AMSOIL OE Synthetic Motor Oils are excellent for use in all
types of gasoline-fueled vehicles. They are recommended for all
domestic and foreign vehicles requiring any of the listed
performance specifications:
10W-30 (OET)
API SN, SM...
ILSAC GF-5, GF-4...
GM 6094M, 4718M
Chrysler MS-6395N
COMPATIBILITY
AMSOIL OE Synthetic Motor Oils are compatible with conventional
and other synthetic motor oils. Mixing AMSOIL OE Synthetic
Motor Oils with other oils, however, will shorten the oil life
expectancy and reduce the performance benefits. Aftermarket oil
additives are not recommended for use with
AMSOIL OE Synthetic Motor Oils.
SERVICE LIFE
In gasoline-fueled vehicles, AMSOIL OE Synthetic Motor Oils are
recommended for the intervals stated by the vehicle
manufacturer or indicated by the oil life monitoring system.
Change oil filter at every oil change.
HEALTH &
SAFETY
This product is not expected to cause health concerns when used
for the intended application and according to the
recommendations in the Material Safety Data Sheet (MSDS).
MSDS’s are available upon request at 715-392- 7101 or
on the
AMSOIL Website. Keep Out of Reach of Children. Don’t
pollute. Return used oil to collection centers.
For AMSOIL warranty information, click here.
|
TYPICAL TECHNICAL
PROPERTIES
AMSOIL OE 10W-30 SYNTHETIC MOTOR
OIL
|
10W-30
(OET)
|
|
Kinematic Viscosity @
100°C, cSt (ASTM D-445)
|
10.8 |
|
Kinematic Viscosity @
40°C, cSt (ASTM D-445)
|
69.9 |
|
Viscosity Index (ASTM
D-2270)
|
145 |
|
CCS Viscosity, cP @ (°C)
(ASTM
D-5293)
|
5942
(-25) |
|
Flash Point °C (°F)
(ASTM D-92)
|
232
(450) |
|
Fire Point °C (°F) (ASTM
D-92)
|
250
(482) |
|
Pour Point °C (°F) (ASTM
D-97)
|
-40
(-40) |
|
Noack Volatility, %
weight loss (g/100g) (ASTM
D-5800)
|
5.8 |
|
High Temperature/High
Shear Viscosity
@ 150°C and 1.0 X 106
s-1, cP (ASTM D-5481)
|
3.3 |
|
Four Ball Wear Test @ 40
kgf, 75°C,
1200 rpm, 1 hour, scar diameter, mm
(ASTM D-4172)
|
0.45 |
|
Total Base Number (ASTM
D-2896)
|
7.9 |
|